НАЗНАЧЕНИЕ – приготовление мягких лекарственных форм.Основные параметры реактора:Объем номинальный, л — 250Материал корпуса – сталь н/ж 316L AISI Материал теплообменной, теплоизолирующей рубашек и обшивки – сталь н/ж 304 AISIДавление в корпусе, бар – от – 1,0 до + 2,0 Давление в теплообменной рубашке, бар + 3,0 (пар)Корпус реактора оснащен предохранительным клапаном.
Теплообменная рубашка оборудована пропорциональным клапаном для дозированной подачи пара в рубашку.
Качество обработки поверхностей: – внутренних – Ra < 0,6 – полированная,
– наружных – Ra < 0,8 – шлифованная.Опросный лист на заказ реактора
Перемешивающие устройства с плавно регулируемой скоростью:
– встроенный гомогенизатор в нижней части корпуса;
– якорная мешалка с развитой поверхностью перемешивания и плавающими скребками.
>Донный клапан Dn 50, седельного типа, санитарного исполнения, с патрубком слива продукта (clamp Dn 50), и механизмом ручного дистанционного управления.
Реактор установлен на 4-х тензодатчиках для определения массы продукта в корпусе.
Для ввода сыпучих компонентов на крышке через clamp Dn50 и шаровый вентиль монтируется воронка объемом 5 л.
Пульт управления оборудован кнопочными постами управления и дисплеями ПИД-регулятора и частотных регуляторов оборотов якорной мешалки и ротора гомогенизатора, а такжн архиватором температуры продукта и оборотов мешалок.
Реактор комплектуются технической документацией включая паспорт сосуда, работающего под давлением и протоколами IQ и OQ.
Reactor 250 l volume for the preparation of soft pharmaceutical forms with lifting mechanism, built-in homogenizer and an anchor stirrer.
Purpose: the preparation of soft pharmaceutical forms.
The main parameters of the reactor:
>Nominal volume, l – 250.
Body material – stainless steel 316L AISI.
The heat exchange/adiabatic jacket and sheathing material – stainless steel 304 AISI.
Body pressure, bar – from 1,0 up to + 2,0
Heat exchange jacket volume, bar – + 3,0 (steam).
The reactor vessel is equipped with a safety valve.The heat exchange jacket is equipped with the proportional valve for the dosed steam supply to the jacket.Surface quality – inner – Ra < 0,6, polished; outer – Ra < 0,8, grinded.The stirrers are with continuously adjustable speed: – the built-in homogenizer in the bottom of the vessel;– the anchor stirrer is with advanced surface of mixing and floating scrapers.
The footvalve Dn 50 of the seated type is without any dead space with the manifold drain of the product (clamp Dn 50) with the hand distance control of the mechanism.
Tension sensors are installed for the definition of the product weight in the vessel.The five liter funnel is installed on the top through the clamp Dn50 and ball faucet for the input of the loose components.
The control panel is equipped with push-button control stations and the displays of the PID controllers and frequency controllers of the speed anchor stirrer and the rotor homogenizer. The are also the archiver of the product temperature and of the speed stirrers on the control panel.
The reactor is accompanied with the technical documentation including the passport of the vessels working under the pressure and the protocols IQ and OQ